Fellows Model 18-5 Gear Shaper. 18″ max Diam. 6″ stroke, 5″ Face, 7.5″ Column Positioning, auto cycle, cutter at top , gears and tooling
- Homepage
- >
- Fellows Model 18-5 Gear Shaper. 18″ max Diam. 6″ stroke, 5″ Face, 7.5″ Column Positioning, auto cycle, cutter at top , gears and tooling
Category: GEAR SHAPERS
Reference Number: 4040
Description:
This Fellows Model 18-5 machine is a very Unique & Rigid machine. It has the vertical cutter slide feature of 7.5″ of travel which allows you to bring your stroking spindle up and down and into parts. Tricky internal hubs are easily cut with this style machine. No need to spend big $$ Dollars on later model CNC Shapers if this machine can do your parts!!
Machine Specifications as follows:
Maximum Diameter External
18″
Maximum Diameter Internal
18″
Maximum Stroke length
6″
Maximum Face Width
5″
Maximum Column Vertical Stroke Positioning
7.5“
Maximum Pitch Spur Gear
3 DP
Maximum Pitch Helical Gear
4 DP (with proper guides)
Max Helical angle depends on cutter and Guide
45 degrees
Spindle Diameter
4″
Stroking speed range
30-440 SPM
Table Diameter
13“
Hole in Table
5.87″
Centerline of spindle to Centerline of Table
0″ – 14″
Cutter Slide height above table Min/ Max
10″ / 17.5″
Max OD of part fixture
24″
Power requirements
460v /3/60
Machine Dimensions L x H x W
12′ x 8′ x 6′ wide
Machine weight
18,000 Lbs
Machine is equipped with the following:
* Column Stroke postioning of 6″
* Cutter at Top
* Auto cycles
* Ball screw on Infeed
* Driven by 7 A/C Electric motors
* Cutter Adaptor
* Misc Change Gears
* Misc tooling
* Electrical Panel
* Hydraulic Unit
* operators and parts Manuals
** This machine is a very rigid production style machine. the upper assembly providing the stroke postioning can be moved up and down almost 7.5″ to get in and out of hard to reach parts, along with its 6″ stroke Length capacity it’s a must for any production house or job shop!!
Machine can be inspected under power with proper notice in our NC Warehouse.
For any questions contact Rich Piselli
E-mail:
rich@pisellient.com
Phone: 704.609.0766
