Mitsubishi Model GC-40 6 axis CNC Gear hobber, 16″ max diameter gear, 15″ face, 6″ diam Hob, chip conveyor, Fanuc Controls, new 1997 inspect under power
- Homepage
- >
- Mitsubishi Model GC-40 6 axis CNC Gear hobber, 16″ max diameter gear, 15″ face, 6″ diam Hob, chip conveyor, Fanuc Controls, new 1997 inspect under power
Category: GEAR HOBBERS, N/C & CNC
Reference Number: 4139
Description:
Mitsubishi 6 Axis CNC Gear Hobbing Machine
Model # GC-40
S/N
AGE 1997
This Mitsubishi CNC Gear Hobbing machine can be inspected in excellent condition under power in our Statesville NC Plant. the machine was recently removed from a shop cutting the gears in the attached photograph. the machine is a very flexible Job Shop Machine.
Machine specifications are as follows:
PRINCIPAL SPECIFICATIONS:
Maximum work-piece diameter
16″/400mm
Maximum diametrical pitch/module
(8M)
Maximum swiveling angle
+45o
Minimum number of teeth
5
Maximum number of teeth
1000
Center distance Max/ Min Hob spindle to work spindle
11.8″(300mm)/1.57″ (40mm)
Maximum radial travel
10.6″ (270mm)
Max. height work table to center of hob spindle
23.6″ (600mm)
Min. height work table center to hob spindle center
7.9″ (200mm)
Maximum axial travel
15.7″ (400mm)
Programming unit
English (inch)
Distance between worktable and tailstock Max/Min
29.1″ (740mm)/13.4″(340mm)
Worktable diameter
11.8″ (300mm)
Maximum worktable speed
60 rpm
Maximum hob size
Diam 5.9″(150mm) x L 9.1″ (230mm)
Maximum hob shift
7.1″ (180mm)
Hob speed range
75-950 rpm
Feed rate:
Axial – inch/min. (mm/min.) 0.04-39.4″ (1-1,000mm)
Radial – inch/min. (mm/min.) 0.04-39.4″ (1-1,000mm)
Rapid traverse Axial – inch/min. (mm/min.) 393.7″ (10,000mm)
Radial – inch/min. (mm/min.) 393.7″ (10,000mm)
Machine is equipped with the following
Fanuc 16 MB CNC Controls
Chip conveyor
Hob arbor
full guarding
tailstock
mist collector
Books and Manuals
call Rich Piselli to set up and under power inspection of this machine
For any questions contact Rich Piselli
E-mail:
rich@pisellient.com
Phone: 704.609.0766
