Gleason-Pfauter Model P 1200G CNC Gear Grinder, 1200 mm diam, 80 mm Profile depth, 1000 mm Z-Axis , 800 mm Table diameter. Equipped with cnc dressing external and internal heads, tailstock, CNC Dresser, Siemens 840C controller , Excellent, new 2004 !

• Homepage
• >
• Gleason-Pfauter Model P 1200G CNC Gear Grinder, 1200 mm diam, 80 mm Profile depth, 1000 mm Z-Axis , 800 mm Table diameter. Equipped with cnc dressing external and internal heads, tailstock, CNC Dresser, Siemens 840C controller , Excellent, new 2004 !

Category: GEAR GRINDERS, N/C & CNC Reference Number: 4159 Description:

GLEASON-PFAUTER CNC GEAR GRINDER
Model # P 1200G 
New: 2004

this Gleason Pfauter machine is well equipped with many options. The machine can be inspected in excellent condition under power. The machine features both an External and Internal Head attachment, Hydraulic Tailstock , CNC Dressing and Siemens 840C control w/ Siemens motors and drives.


Machine specifications are as follows:
Max External Diameter 1200mm (48″)
Max Internal Diameter 1200mm (48″)
Maximum grindable profile depth 80mm (3.149″)
Max Grinding wheel Diam x Width 400 x 100mm (16″ x 4″)
Max Radial Dist (X-Axis) 770mm
Max Tangential Dist (Y-Axis) 300mm
Max Axial Dist (Z-Axis) 1000mm
Max Head Swivel 45 deg. +/-
Work Table Diam 800mm
Work Table Bore 182mm
Work Table Max Load Capacity 100 kN
Tailstock Travel Dist 900mm
Tailstock Steady Rest Max/Min 250/110mm
Max Dressing Wheel Diam 130mm
Max Dressing Unit travel Dist 150mm
Max Dressing Spindle Speed Range 2000-8000
Internal Grinding arm #2 specs: -Max Grindable profile depth 50mm -Max Swing Diam 1200mm -Minimum Internal Diam 250mm -Max Ring-Size 180mm -Max Width (face) 350mm -Max form grinding wheel Diam x width 240 x 50mm -Diameter of the spindle journal for retaining 40mm -Spindle speed of internal Head 2700-5500 Machine overall dimensions Length 8100 mm Width 7600 mm Height 4400 mm Machine weight 17000 kg Power Requirement : 575 volt, 60 HZ, 80 kVA Machine is equipped with the following: Siemens 840C control w/ siemens model 611 drives External grinding head w/ CNC Dressing unit Internal Grinding Head Attachment w/ Internal grinding arm #2 Hydraulic Tailstock and steady rests Probing and stock dividing ON-Board Inspection w/ Chart recording External chilling system Hoffmann filtration and swarf unit Full Machine guarding Stand alone electrical Cabinet w/ A/C units Misc tooling , Wheel flanges , Grinding wheels and dresser disc, work fixtures, etc. Full manuals and documentation -Machine can be inspected under power Grinding gears. Machine demonstration, sample parts and charts available Please contact us to set up and under power inspection of this Machine. It’s one of the finest machines on the market today!
For any questions contact Rich Piselli E-mail: rich@pisellient.com Phone: 704.609.0766